Показаны все (6)Отсортировано по последнему

Китай Гибочный станок

Компания MIHARMLE производит современные гибочные центры для упрощения обработки листового металла. Наши гибочные решения обеспечивают точность, гибкость и эффективность, помогая вам легко справляться со сложными задачами гибки.

Получить предложение сейчас

Гибочный центр C2000 Гибочный станок для гибки панелей

Продается панелегибочный центр C2000

Цитировать сейчас
сервоэлектрический листогибочный пресс

Полностью электрический сервоприводной листогибочный станок с контроллером INOVANCE System

Цитировать сейчас
мини электрический листогибочный пресс

Мини-электрический листогибочный пресс с ЧПУ для продажи с контроллером DA53T

Цитировать сейчас
Гибкий листогиб

C1200 Сервогибкий автоматический панелегиб

Цитировать сейчас
MIHARMLE DE15 полностью электрический серво пресс тормоз Mahine для продажи

DE-15 Система управления сервоприводом электрического листогибочного станка

Цитировать сейчас
Гибкий автоматический панелегиб 1500C

Интеллектуальный гибкий автоматический панелегиб серии 1500C

Цитировать сейчас

Key Advantages

  • Consistent bending effect: The rigid frame, grating ruler, and compensation system work together to ensure the consistency of workpiece bending.
  • Accurate edge positioning: Using Taiwan HIWIN ball screws and guide rails, combined with a back gauge system, precise positioning of the sheet metal can be achieved.
  • Simplified setup: The CNC operating system simplifies the setup of recurring orders, allowing users to directly use previously verified parameters and improve production efficiency.
  • Custom molds: We will select the appropriate bending mold based on your workpiece and production needs, and we also support mold customization.
  • Pure electric drive: The pure electric bending machine adopts a pure electric drive for the lead screw, eliminating the need for hydraulic oil and reducing the risk of oil leakage.
  • Large-size sheet support: Equipped with a front material support device to help operators handle large-size sheets.
Получить расценки
Custom-Tooling
Precise-Positioning-DA53T
Precise-Positioning
Consistent-Bending-Results
All-Electric-Drive

Bending Machine Selection Guide

We will select the right bending machine for you based on your daily production and processing requirements.

step

Influencing factors

Requirements Analysis

1

Identify Your Material

Identify the material of the workpiece—whether it is stainless steel, low-carbon steel, or aluminum. Different materials require different bending forces.

2

Check Bending Length and Force

Provide the maximum bending length and the corresponding material thickness, which will be used to select the appropriate machine and tooling models.

3

Review Part Geometry

Provide drawings and verify parameters such as die clearance, throat depth, and opening height.

4

Match the Machine to Your Workload

Conduct a comprehensive assessment based on the workpiece bending speed and production cycle.

5

Select Controls and Handling Options

Select the backgauge and other automation configurations based on workpiece requirements.

Not Sure Which Machine Fits Your Parts?

Send your drawings, material specifications, and daily output target. Miharmle can recommend a suitable machine based on the bending requirements.

Comparison of Bending Machine Types

Use the comparison table to select the bending machine that best suits your needs. The final selection should be based on a comprehensive evaluation of the machine model, cutting tools, and workpiece.

Selection Factor

Hydraulic CNC Press Brake

Pure Electric Servo Press Brake

Тандемный листогибочный пресс

Automatic Panel Bender

Main selection reason

 Various Sheet Metal Processing Methods

No hydraulic oil required; energy-efficient and eco-friendly

Multi-machine synchronization for bending long workpieces

Automated Bending with Robotic Arms

Typical parts

Brackets, frames, cabinets, and sheet-metal components

Small precision parts, brackets, and housings

Long workpieces such as light poles and heavy-duty structures

Doors, covers, trays, and cabinet panels

Capacity considerations

Required pressure and length for the material

Available tonnage and working length

Synchronized processing capability and load distribution

Material thickness, dimensions, and flange height

Tooling considerations

Punches and dies selected for each application

Choose matching press brake dies.

Install and adjust the dies on both machines.

Tooling and bending clearance must suit the panel design

Handling considerations

Manual handling or automated solutions

Manual handling or compatible automated solutions

Support and collaborative handling for long panels

Automatic positioning; loading and unloading methods depend on the specific configuration

Maintenance focus

Hydraulic systems, lubrication, tooling, and mechanical components

Servo drives, lubrication, tooling, and mechanical components

Two-machine setup, including synchronization and calibration

Bending mechanisms, positioning systems, and handling equipment

Confirm before buying

Force, working length, axes, and crowning

Force, length, duty cycle, and part clearance

Long-part trial and operating modes

Part feasibility and complete cycle time

Приложения

Electrical Cabinets & Enclosures

Electrical Cabinets and Enclosures

Used for processing electrical cabinet doors, mounting plates, and metal enclosures. The bending dimensions are accurate, making it easier to align the panels and facilitating subsequent assembly.

Heating, Ventilation and Air Conditioning Systems

HVAC and Ventilation Systems

Commonly used for processing air conditioner casings, ducts, and connectors. The edges fit well after bending, which helps reduce assembly gaps.

Stainless Steel Kitchen Equipment

Stainless Steel Kitchen Equipment

Suitable for processing stainless steel products such as kitchen countertops, sinks, and equipment casings. The bent shape is neat and also makes subsequent cleaning and maintenance easier.

Automotive & Transport Components

Automotive and Transportation Parts

We can process various metal brackets, pallets, and protective covers to meet the requirements of parts for structural strength, dimensions, and assembly precision.

Elevators & Architectural Metalwork

Elevator and Building Metal Products

Used for processing elevator door panels, decorative panels, and other building sheet metal parts, ensuring neat edges and a smoother overall appearance.

Machinery & Industrial Equipment

Machinery and Industrial Equipment

Suitable for processing machine housings, equipment supports, and various metal structural parts. The bending method can be adjusted according to different product sizes and structures.

Energy Storage & Electrical Equipment

Energy Storage and Electrical Equipment

Sheet metal bending is required for the outer shell of the energy storage cabinet, the battery cabinet door panel, and internal mounting brackets. Accurate bending dimensions help ensure the cabinet structure and subsequent assembly.

Precision Instruments & Medical Equipment

Precision Instruments and Medical Equipment

Used for processing instrument housings, equipment panels, and precision sheet metal parts. By controlling the bending angle and dimensions, high requirements for appearance and assembly precision can be met.

FAQs of MIHARMLE Bending Machine

If you require high bending force and need to handle a variety of processing tasks, a hydraulic press brake is recommended.

If your workpiece requires high precision, fast response, and minimal maintenance related to hydraulic fluid, then an all-electric bending machine is the ideal choice.

You can provide drawings and detailed information such as processing length and workpiece shape, and our engineers will recommend the most suitable equipment based on your needs.

Yes, MIHARMLE can customize press brake punches and dies based on the drawings you provide, as well as specifications such as your press brake model, material thickness, and bending radius.

Available CNC systems include Delem DA53TX, DA58TX, DA66S, and DA69S; Cybelec system; ESA VIS-640; and Chiao Hung (Taiwan) system. The latter is an optional configuration for the all-electric bending machine. For torsion bar bending machines, the TP10 system is also available.

In addition, we also offer domestically produced (Made in China) CT600, CT12, and CT18 systems.

We will select the most suitable configuration based on your specific processing needs.

Yes, we can conduct a comprehensive evaluation and provide automated loading and unloading solutions, which can be equipped with robotic handling systems.

Please provide your technical drawings, production requirements, and factory layout information. MIHARMLE's engineers will assess your needs and provide you with a corresponding quotation.